USB 시리얼 변환기 칩 제조 업체중 가장 유명한 FTDI 사에서 직접 기술지원하는 제품입니다.


HI-Speed USB to 2-Port Serial RS485 Adapter, USB to serial 2 Port 변환기


OS 별 Driver 다운로드 : Windows 8.1 , Windows 7 등 Windows 모든 버전을 지원하며 Mac OS, Linux 를 지원 합니다.



The USB2-H-5002 is a USB to a dual interface RS485 level serial UART adaptor incorporating FTDI’s FT2232H Hi-Speed USB2.0 (480 Mb/s) to dual serial UART interface IC device. The FT2232H handles all the USB signaling and protocols. The adaptor provides a fast, simple way to connect devices with an RS485 interface to USB.

The integrated electronics of the USB2-H-5002 utilise the FTDI FT2232H and includes RS485 level shifters plus TXD/RXD LEDs to provide a visual indication of data traffic through the adapter.

Flexible mounting allows the USB2-H-5002 to be used in a variety of applications, from a portable adapter to accompany a laptop to permanent installations in industrial, commercial and retail locations.

The enclosure incorporates a standard USB-Mini-B client connector for connection to an upstream host or hub port.  RS485-level signals are available on two industry-standard DE-9P (DB9) connectors.  The maximum RS485-level data rate is 10 Mbps.

The USB2-H-5002 adapter require USB device drivers, available free from http://www.easysync-ltd.com, which are used to make the USB2-H-5002 appear as a Virtual COM Port (VCP). This allows existing serial communications software, such as HyperTerminal, to exchange data through the USB2-H-5002 to a legacy RS485 peripheral device.

Pin 9 of the D-sub connector can provide +5 V power output with maximum 250 mA. 

Features:

·    Adds dual RS485 serial port by connecting to a USB 2.0 Hi-Speed interface.
·    Echo and non-Echo modes selection.
·    Easy plug & play installation and RS-485 device connection
·    Works with USB 1.1 & 2.0 Host and Hub ports
·    Industry Standard FTDI chip set & device drivers for maximum compatibility
·    Microsoft Windows® WHQL-certified, Mac OS X, Linux and Windows CE device 
               drivers downloadable for free
·    Installs as a standard Windows COM port
·    COM Port Number assignment is configurable
·    FIFO:  4k byte transmit buffer, 4k byte receive buffer
·    RS485 data signals: Data+, Data-, GND
·    Powered by USB port. No external power adapter required
·    Pin 9 of DE-9P (DB9) can provide +5 VDC output at 250 mA (total on 2 ports)
·    Serial port speed up to 8 Mbps
·    Serial Communication Parameters
               o    Parity: None, Even, Odd  
               o    Data bits: 7, 8 
               o    Flow control: X-ON/X-OFF, None
·    Dual DE-9P (DB9) male connector
·    LEDs indicate USB Enumeration, RxD, TxD for monitoring port status & easy 
               diagnostics
·    Operating temperature of -40°C to +85°C
·    USB cable of 0.9 meter included
·    FCC and CE approved