STN1170 OBD II, SW-CAN, MS-CAN to UART Interpreter ICSTN1170 Multiprotocol OBD II to UART Interpreter 는 STN1110 OBD 칩의 모든 기능에 Single Wire CAN (SW-CAN) 과 Medium Speed CAN (MS-CAN) 프로토콜을 UART 로 변환해 주는 변환기입니다. 자세한 내용은 아래 영어 내용 참조하세요 관련 제품:: /goods/view?no=498 << STN1110 개발보드 /goods/view?no=459 << ECUsim 2000 ECU simulator /goods/view?no=274 << OBDLink(USB) 관련 자료:: /board/view?id=board3&page=0&seq=942 << ECUSim 2000등을 이용한 Test 예제 에 OBD 코드표 및 설명이 되어 있습니다.
*. OBD(On-Board Diagnostic, 배출가스 자기진단장치) OverviewSTN1170 combines the entire STN1110 (multiprotocol OBD-II) feature set with Single Wire CAN (SW-CAN) and Medium Speed CAN (MS-CAN) protocols in a single 44-pin IC. SW-CAN protocol support allows your device to access, monitor and issue commands on vehicles utilizing GM’s proprietary CAN network. Similarly, MS-CAN provides access to Ford’s proprietary CAN network on supporting models. On vehicles hosting SW-CAN or MS-CAN networks, our enhanced ST command set allows your device to interpret data not available on the vehicle’s OBD-II bus. Using the GM & Ford proprietary codes, you can commonly interpret current status of systems such as:
Control commands commonly found on supported vehicles include:
While STN1170 ST commands will provide access to SW-CAN and MS-CAN networks, the proprietary GM & Ford codes must be obtained independently. A popular method is to join the Equipment and Tool Institute where the codes can be accessed/purchased. Alternately, the traffic can be analyzed and reverse engineered. Supported Protocols
Features
PowerSave TechnologyThis diagram shows the various triggers available in the STN11xx family of ICs. Please refer to the STN11xx PowerSave Functionality documentation for more details. DownloadsSTN1170 Datasheet
|