Features:
- 14 Analog Inputs (12-16 Bits Depending on Speed)
- UE9-Pro Adds 24-bit Low-Speed ADC for 20-Bit Effective Resolution
- ±5 or 0-5 Volt Maximum Analog Input Range
- 2 Analog Outputs (12-Bit, 0-5 Volts)
- 23 Digital I/O
- Up to 2 Counters (32-Bits Each)
- Up to 6 Timers (Pulse Timing, PWM Output, Quadrature Input, ...)
- Supports SPI, I2C, and Asynchronous Serial Protocols (Master Only)
- Supports Software or Hardware Timed Acquisition
- Maximum Input Stream Rate of 50+ kHz (Depending on Resolution)
- Capable of Command/Response Times As Low As 1.2 Milliseconds
- Built-In Screw Terminals for Some Signals
- USB 2.0/1.1 Full Speed Interface
- Ethernet 10Base-T Interface
- Dual-Processor Design with 168 MHz of Total Processing Power
- Electrical Isolation Possible with Ethernet Interface
- Wireless DAQ Possible with Ethernet Interface and 802.11 Bridge
- No Power Supply Needed for USB Operation
- Drivers Available for Windows, Linux, Mac and Pocket PC
- Examples Available for C/C++, VB, LabVIEW, Java, and More
- Includes Licensed Copy of DAQFactory Express Software (Win2000+)
- Includes USB and Ethernet Cable, Power Supply, and Screwdriver
- Universal Power Supply with Clips (Australia, Europe, UK, USA)
- Free Firmware Upgrades
- Money Back Guarantee
- Enclosure Size Approximately 3 x 7 x 1 (75mm x 185mm x 30mm)
- Rated for Industrial Temperature Range (-40 to +85 Degrees C)
Labjack 제품 비교표
내용 |
LJU12 |
LJU3 |
LJU6 |
LJUE9 |
기본 AI 채널 |
8 |
8 |
4 |
4 |
확장 AI 채널 |
No |
16 (CB15 사용 : 기본 채널 포함) |
14 (CB37 사용 : 기본 채널 포함) |
14 (CB37 사용 : 기본 채널 포함) |
측정 범위
(Single End,
Differential) |
SE : ± 10 V
Diff : ± 20 V |
LV 모델
SE : 0~2.4 V 또는 0~3.6 V
Diff : ± 2.4 V |
±10, ±1, ±0.1 V ±0.01V (TC및 로드셀 직접 연결가능) (S/W 선택 사용) * U6는 6uV 가능 U6-Pro는 1uV 가능 |
Unipolar: 0~ 5v
Bipolar: -5 ~ +5 |
측정 범위 증가 모델 |
No |
HV 모델
앞 4개 채널
SE : ± 10 V
Diff : ± 20 V |
No |
No |
해상도 |
12 Bit |
12 Bit |
16 ~18 Bits |
12 ~ 16 Bits |
해상도 증가 모델 |
No |
No |
LJU6 Pro
24 Bits |
LJUE9 Pro
24 Bits |
Ethernet 지원 |
No |
No |
No |
Yes |
Thermocouple 지원 |
No |
No
(LJTiA 증폭기를 사용하면 가능) |
Yes
(직접 연결 사용) |
No
(LJTiA 증폭기를 사용하면 가능) |
AO 채널 |
2 |
2 |
2 |
2 |
Digital I/O
(대부분 확장 가능) |
4
(확장시 총 20개) |
AI 채널과 동일 (S/W 선택 사용)
(확장시 총 20개) |
4
(확장시 총 20개) |
4
(확장시 총 24개) |
Digital I/O Logic |
5 V |
3.3 V |
3.3 V |
3.3 V |
VB, VC, Labview 등의 Application 예제(소스 코드 포함)가 제공됩니다.
아래는 Labview 예제 실행 화면입니다.
http://labjack.com/support/ud/ljstreamud 에서 예제는 다운로드 할 수 있습니다.
http://labjack.com/support/ud/examples/labview
Power Supply:
Power can be provided by the USB cable or an external 5 volt supply (included). When only Ethernet is connected, and an isolated power supply is used (such as the included wall-wart), the entire UE9 is electrically isolated.
Wireless Data Acquisition:
Combining the UE9 with a standard 802.11 wireless Ethernet bridge or access point ($50-$200 from any computer retailer) provides inexpensive wireless data acquisition. Applications include high-speed continuous wireless data acquisition, long distance remote sensing and control, or PDA based data acquisition. (More Info)
Optional Accessories:
The CB15 is a simple screw terminal breakout for the DB15 connector. The CB37 is a simple screw terminal breakout for the DB37 connector. The EB37 experiment board also provides screw terminals for the DB37 connector, and in addition provides a solderless breadboard and useful power supplies.
The RB12 provides a convenient interface for the UE9 to industry standard digital I/O modules, allowing electricians, engineers, and other qualified individuals, to interface a LabJack with high voltages/currents. The RB12 relay board connects to the DB15 connector on the LabJack, using the 12 EIO/CIO lines to control up to 12 I/O modules. Output or input types of digital I/O modules can be used. The RB12 is designed to accept G4 series digital I/O modules from Opto22, and compatible modules from other manufacturers such as the G5 series from Grayhill. Output modules are available with voltage ratings up to 200 VDC or 280 VAC, and current ratings up to 3.5 amps.
The LJTick-Divider (LJTD) signal-conditioning module is designed to divide 2 single-ended higher voltage analog signals down to 0-2.5 volt signals.
The LJTick-DAC (LJTDAC) provides a pair of 14-bit analog outputs with a range of ±10 volts. Plugs into any digital I/O block, and thus up to 10 of these can be used per UE9 to add 20 analog outputs.
The LJTick-InAmp (LJTIA) signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges) and thermocouples. Each amplifier converts a differential input to single-ended.
The LJTick-RelayDriver (LJTRD) allows 2 digital I/O lines on a UE9 to each control a relay or other moderate load up to 50V/200mA.
The LJTick-CurrentShunt (LJTCS) signal-conditioning module is designed to convert a 4-20 mA current loop input signal into a 0.47-2.36 volt signal.
The LJTick-Proto (LJTP) consists of an 8x8 grid of holes for prototyping custom signal-conditioning ticks for the LabJack UE9.